Brake fluid tester
Brake fluid tester with clamps, set
BREAK FLUID TESTER
Art.-no. 071561 100
EAN 4046777443998
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +45 79 32 31 70.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 50,000 products
- For all standard brake fluids (DOT3, DOT4, DOT4+, DOT5.1 etc.) and new brake fluids
- Operated through vehicle's own 12 V battery
- Measuring temperature up to +320°C via boiling point process
- Very simple user guidance through full test process on the LCD display
- Polarity protected
Notice
The brake fluid should be replaced at least every two years or if the fluid is approaching the wet boiling point!
Notes on use: Clean test tip with water after use
Product information
Datasheets(X)
Instructions
The absorption of water (hygroscopy) lowers the boiling point of the brake fluid. Long braking operations may cause steam bubbles to form and could result in failure of the braking effect. The most accurate way to monitor the boiling point of the brake fluid is to use our boiling point tester. The brake fluid should be changed if the boiling point is below the recommended minimum temperature.