Welcome to Würth Denmark For trade customers only

PERFECT plastic care

Plastic care PERFECT
PLACARE-PERFECT-1LTR

Art.-no. 0890700008

EAN 4065746685504

Individual price display after login
PERFECT plastic care

Art.-no. 0890700008

Individual price display after login
Quantity
PU

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 50,000 products

For pore-deep and long-lasting maintenance and protection of unpainted plastics and rubber parts
  • High-quality and very economical care gel for unpainted plastic parts outdoors

  • Provides deep-acting care to prevent fading, cracks, embrittlement and hardening of plastics during regular use

  • Long-lasting protection and sealing of the treated areas
Notice

Do not apply on damp surfaces, do not apply too thickly to avoid increased dust attraction. Do not use in the hot sun or on hot surfaces.

Application area

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Suitable for unpainted plastics such as bumpers, trim panels, door handles etc. Also suitable for rubber.

Instructions

Apply a small amount of product to an applicator or cloth and apply a thin layer to clean and dry surfaces.

Contents

1 l

Container

Bottle

Smell/fragrance

Odourless

Colour

Colourless

Chemical basis

Combination of additives

Density

0.845 g/cm³

Shelf life from production

5 Years

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 2
Gas-tight and resistant to exhaust gases produced by combustion processes
Disposable gloves, nitrile, extra strong, type A
Disposable gloves, nitrile, extra strong, type A
Description:
Permeation level: 5
Durable and robust disposable gloves with excellent chemical protection
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information