Welcome to Würth Denmark For trade customers only

Rust Stop primer

PRIM-RUSTSTOP-750ML

Art.-no. 0890191

EAN 4045989901586

Individual price display after login
Rust Stop primer

Art.-no. 0890191

Individual price display after login
Quantity
PU

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 50,000 products

Brush-on, active corrosion protection for metallic surfaces.

Excellent corrosion protection


  • Meets corrosion category C3 "high" in accordance with DIN EN ISO 12944.

  • Approx. 500 h in accordance with DIN EN ISO 9227.

  • Resistant to water, sea water and many chemicals.


Quick drying


  • Treated materials are quickly ready for use and transportation.

  • Ideal as a transport coating in steel construction.


Can be painted over



Short-term temperature resistance up to +120 °C



VOC-compliant


  • Reduced solvent content.

  • Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC).
Notice

Note: Can be painted over with standard top-coat paint systems as per the table (see technical data sheet).

Application area

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Corrosion protection primer for use in automotive construction, shipbuilding, metal and steel construction, tool manufacturing, bridge construction, tank construction, pipeline construction, container construction, agriculture and forestry, municipal management, construction machinery etc.

Instructions

The surface must be clean, dry and free of grease. Remove loose rust, paint and dirt using a wire brush, scraper or similar tool. Stir well before use. Apply 2 coatings approx. 1 hour apart. Recommended nozzle size 1.6 mm.

Suitable glove:
 
Product
Description
Disposable gloves, nitrile, extra strong, type A
Disposable gloves, nitrile, extra strong, type A
Description:
Permeation level: 0
Durable and robust disposable gloves with excellent chemical protection
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 3
Gas-tight and resistant to exhaust gases produced by combustion processes
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information