Air-fed breathing protection system, Airflow
SP-PAINTSHADE-M/BELT/REG-AIRFLOW
Art.-no. 0899482100
EAN 4046777266818
Register now and access more than 50,000 products
Complete multi-part kit
- Fresh-air-fed paint visor with high visibility and room for standard spectacles
- Belt with carbon filter element to remove odour and taste from the system
- Warning whistle activates if air flow to mask falls too low (below 180 l/min)
- Black nylon belt with tough plastic buckle
The system is connected to a compressor with a minimum flow rate of 600 l/min. It is important that the compressor is positioned where clean and dry compressed air can be supplied.
Masks and filters are approved according to EN 14594, Class B
Datasheets(X)
The breathing protection system can be used for painting work. It must be used in working situations where the oxygen concentration is less than 17% or where there is a risk of oxygen deficiency, e.g. silos and tanks. It must also be used if there is a high concentration of pollutants in the air when no filters are available to absorb the substances and for work where mask is to be used for more than 3 hours per day.