Synthetic adhesive lubricant Strong
921-ADHESIVE-LUBRICANT-STRNG-400ML-12PCS
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +45 79 32 31 70.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 50,000 products
Extremely well adhering, synthetic lubricant with low drip tendency and emergency running properties thanks to boron nitride. Extremely resistant to spray, salt water, high pressure and high temperatures.
Human+Technology®
- Protects the user and the work environment - free from nerve-damaging n-Hexane, potentially allergenic fragrances and colourants, harmful solvents
- No indicators of toxicological effects
- NSF-registered
- ISO 21469, certified Kosher and Halal
- Formulation contains no silicone oil, PFAS or microplastics
- Lower impact on people and the environment through the use of fewer health-hazardous ingredients
Properties
- Immediate, excellent adhesion on all substrates, which reduces the quantity used
- Boron nitride ensures reduced friction with good emergency running properties
- Colourless, transparent and non-discolouring
- Good resistance to spray and salt water for reliable corrosion protection
- Excellent resistance to pressure and temperatures
- Very good creep effect after spraying along with very good damping properties
- Solvent-free for an extremely short flash-off time
Notice
- When used in the food preparation industry, only the minimum technically necessary quantity may be used.
- If using the product as a corrosion-protection film, it must be removed completely before the device is put back into operation.
Product information
Datasheets(X)
Application area
- For permanent lubrication of moving parts such as chains, ropes, open drives, levers, joints, rods, hinges, sliding parts and bearings requiring a strongly adhering lubricant
- For overhead lubrication points where dripping must be avoided
Instructions
Refer to the product information before use. Shake can well before use, pre-clean the parts to be lubricated and spray evenly from a distance of approx. 20 cm. Repeat the process for optimum corrosion protection.
Chemical basis | Mineral oil with polybutene |
Lubricant system | Oil |
Colour | Light brown |
Smell/fragrance | Mild |
Density | 0.871 g/cm³ |
Density conditions | at 20°C, DIN 51757 |
VOC concentration (CH) | 53.67 % |
Min. flashing point | -80 °C |
Silicone-free | No |
Acid-free | Yes |
Contents | 400 ml |
Weight of content | 259 g |
Container | Aerosol can |
Shelf life from production | 24 |
Conditions to maintain shelf life from production | in sealed original containers, not below 5°C |